HP Envy 4520 Wireless Connect Setup

HP Envy 4520

Below is a list of Wireless connect setup related questions that are frequently asked by users dealing with printer. Solution to the common problems is speculated to help you out resolving them at your own. You can initiate a support service at any time & let us help you with HP envy 4520 setup wireless.

How do I Enable WPS on my Router

• Firstly, make sure security type is not set to ‘None’ or ‘WEP’ & then proceed with below steps to enable WPS on your router.
• Go to router configuration menu followed by ‘Access the router configuration’.
• Tap Wireless settings from to menu. From left side of panel, Press Basic security settings.
• Go to turn wireless ON & be sure it is switched ON.
• After this, all you need to do is scroll down the list & Tap on Apply to amend changes. Now, you have successfully enabled WPS on your router.
• You can connect by pressing the WPS button available on your router & after 2 minutes connect the 123.hp.com/setup 4520 device you want to by pressing the WPS button on it.

How do I connect my Phone to WIFI Using WPS

• Now a day, Smartphones are availed with feature to use & connect with WPS push or WPS Pin method.
• To connect your phone to Wi-Fi using WPS, go to settings.
• Open Wi-Fi in settings folder & go to advanced settings. Look for WPS push button in your smartphone & click it.
• After this, press WPS button on router to establish connection. Make sure you do not press the router button for more than a second as it may reset your router settings.
• After a few seconds you will observe that connection is established.
• Above was a method for WPS push. You can connect your phone by WPS pin as well by following these steps.

How do I connect HP Envy 4520 Printer to a new Wireless Network

• First of all, for 123 hp envy 4520 setup wireless to a new wireless network you need to see if the printer is already connected to a network or not.
• If the printer is connected to a network then go to network settings & remove the network or disconnect.
• Make sure your new wireless network is available for connect. Disconnect all USB or Ethernet cables, if any.
• Tap wireless from printer’s control panel & go to settings to open Wireless Setup Wizard. Now, search for your network & press Ok.
• If your network name doesn’t show in list then ass your network name & follow onscreen instructions to add network.
• When asked, enter password or WEP key to establish connection.

How do I connect HP Envy 4520 Printer to my Computer

• Switch on your computer & connect it with the same wireless connection to which you are going to connect hp envy 4520 setup printer.
• Make sure your new wireless network is available for connect. Disconnect all USB or Ethernet cables, if any.
• Tap wireless from printer’s control panel & go to settings to open 123.hp.com/setup 4520 Wireless Setup Wizard.
• Now, search for your network & press Ok.
• If your network name doesn’t show in list then ass your network name & follow onscreen instructions to add network.
• When asked, enter password or WEP key to establish connection.
• On your Computer, download complete driver software & install those following onscreen instructions.
• During installation, if prompted, set connection type as wireless.

What If HP Envy 4520 Printer is Not Found or Connerted during USB Setup

• Remove router plug from wall socket & turn off printer.
• Shut down system after closing all running programs that include HP software installation.
• Now, restart router, printer & system. Install 123.hp.com/setup 5255 & software.
• Make sure your USB is connected to the printer & doesn’t have a loose connection.
• If required, try connecting with a different USB. Do not connect USB beforeh&.
• You need to connect USB only when prompted to connect during installation.
• If you connect or disconnect disregard of the system instruction it may show bugs like ‘printer is not found’, ‘No devices found’ etc.
• Follow above steps & you should get rid of the error.

What Happens If I Connect the USB Cable Without Installing the HP Driver

• It is recommended that you connect USB cable only when you are prompted to connect.
• Connecting USB beforeh& may incur issues as you may get errors like ‘USB not recognized’, ‘USB printer error’, & ‘USB scanner error’ & so on.
• It’s not necessary that your system will encounter this type of error every time you insert USB without installing HP driver.
• You can connect USB cable to your printer & while installing HP driver, you need to select USB already connected from the list & proceed further.
• However, this may result in some connectivity problem at times. So, the former is recommended.